Downloads
Contact us Print page

Blastware 10.40 Download

Who should download this version?

If you are a Series IV user this upgrade is mandatory. It must be downloaded to your PC and you MUST also reload the operating system in each one of your units. If you do not reload the operating system the unit may not continue to operate properly.

If you are a Series III user and you are using Auto Call Home you should also upgrade you PC software to this version. We have made several improvements to the communication part of the Auto Call Home™ function.

New features in this release:
Blastware Compliance

  1. Series III – Resolved the issue that always set the microphone alarm level to the default value.
  2. Series IV - The Sensor Check function now reports the geophone model connected.
Analysis
  1. Signature Hole Analysis – Now allows the display of the simulated waveforms to go beyond the record length of the seed waveform.
  2. Truncate function – This function now sets unwanted data to zero.
  3. Increased the resolution of the Export Data function.
  4. Added the Frequency Weighting files for BS-6472.
Series IV
  1. Verify which sensor(s) are connected anytime the unit is turned on.
  2. Prevent the Sensor Check in Advanced Mode from modifying the current channel setup.
  3. The Scheduler now supports the Advanced Setup files.
  4. The unit displays a warning if the sample rate is below the recommended setting.
  5. Added an Extended Memory Option of 240 megabytes for units with serial numbers greater than MP13200.
  6. Improved the speed of reading, writing and deleting files on the unit.
Auto Call Home
  1. Resolved the issue where the Series IV Scheduler did not initiate Monitor Mode.
  2. Corrected the port numbers reported when units Call Home.
  3. The Monitor Log files are now deleted after copying if there were no events created. This prevents duplicate log entries being displayed by the Blastware Event Manager.
  4. The new Auto Restart function allows Call Home and BWMail to connect automatically after a computer restarts.
What you need to run Blastware® Software

Blastware® Software can run on any IBM-compatible PC with the Windows® 2000 or XP operating system with the following requirements:

  • CD-ROM drive
  • Mouse
  • SVGA or higher screen resolution
  • USB port for the Advance Software hardware dongle (when using the advanced software module and a USB to Serial communication cable for the unit, an additional USB port is required)
  • RS232 Serial Port for communication with the unit
  • Printer (optional)
  • Modem (optional) - U.S. Robotics® 56k External Modem recommended.

Note: If you currently have Blastware Advanced, your existing parallel port dongle will not work with this version of software download.

Blastware Download
Title:
First Name:  
Last Name:  
Company  
Address:  
City:  
State/Province:  
Zip/Postal Code:  
Country:  
Email:   
Telephone Number:  

Please indicate the reasons for downloading the software:

Please indicate the number of Instantel monitors you currently own:

Please indicate if you would like the following:

 
 


Read our LICENSE AGREEMENT
[In order to proceed you must check the I agree button]





Instantel License Agreement - IMPORTANT Please Read

This is a legal agreement between you (either an individual or an entity) and Instantel, the worlds most trusted seismographs for vibration monitoring (Instantel. By downloading this software you are agreeing to be bound by the terms of this agreement.

The software which accompanies this license agreement (the "Software" is warranted against defects in materials and workmanship and shall perform substantially in accordance with the accompanying written materials for a period of one year. Should a product fail within this period it shall be repaired or replaced free of charge. Instantel does not warrant that the operation of the Software will be uninterrupted or error free. Instantel does not represent that any product will prevent bodily injury or damage to property. This warranty is void if the product has been dismantled, altered or abused in any way. EXCEPT FOR THE WARRANTIES SPECIFIED IN THIS AGREEMENT, THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OR CONDITIONS OF FITNESS FOR PURPOSE, MERCHANTABILITY OR FUNCTION OF THE SOFTWARE FOR A PARTICULAR PURPOSE AND THOSE ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A COURSE OF DEALING OR USAGE IN TRADE. USE OF THE SOFTWARE IS ENTIRELY AT YOUR SOLE RISK.

INSTANTEL WILL NOT BE LIABLE FOR: (A) HARM TO OR LOSS OF YOUR RECORDS OR DATA; (B) ANY CLAIMS AGAINST YOU BY THIRD PARTIES; OR (C) ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST BUSINESS REVENUE, OR FAILURE TO REALIZE ON SAVINGS, EVEN IF INSTANTEL HAS BEEN ADVISED OF THE POSSIBILITY OF THESE DAMAGES. THIS LIMITATION APPLIES TO ALL CLAIMS BY YOU IRRESPECTIVE OF THE CAUSE OF ACTION UNDERLYING THE CLAIM BUT NOT LIMITED TO BREACH OF CONTRACT INCLUDING FUNDAMENTAL BREACH, TORT INCLUDING NEGLIGENCE AND MISREPRESENTATION; AND BREACH OF STATUTORY DUTY. IN NO EVENT SHALL THE LIABILITY OF INSTANTEL EXCEED THE COST OF THE SOFTWARE.

This agreement allows you to use the Software on one computer and make one copy of the software solely for backup purposes. You must reproduce on any such copy all copyright notices and any other proprietary legends on the original copy of the Software. You may not decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human conceivable form.

This agreement gives you limited rights to use the Software. Although you own the disk on which the Software is recorded, you do not become the owner of, and Instantel retains title to, the Software, and all copies thereof. All rights not specifically granted in this agreement are specifically reserved by Instantel.

Instantel may terminate your license if you breach any term of this agreement and do not remedy the breach within 10 days written notice of the breach. Upon termination you will immediately delete the Software from the computer in which it is installed and return all copies of the Software to Instantel.

This agreement constitutes the entire agreement of the parties with respect to the subject matter and supercedes all prior agreements, understandings, negotiations and discussions, whether oral or written, between the parties. This agreement will be governed by the laws of the Province of Ontario excluding the law of conflicts and excluding the United Nations Convention of Contracts for the Sale of Goods. You agree to attorn to the exclusive jurisdiction of the courts of the Province of Ontario which will have exclusive jurisdiction over matters in respect of this agreement.

Read our Return to Download